Topaz for grapes.

Topaz is fungicide... It fights very effectively against powdery mildew and powdery mildew on grapes. Grapes are a berry crop from the grape family. When cultivating this plant, care must be timely, high-quality and delicate. Very often, such a plant can be affected by fungal infections. Powdery mildew, for example, can cause you to lose your entire crop.

In more detail about the fungicidal agent called topaz.

This drug has a wide range of effects.

It can help get rid of diseases such as: 1) powdery mildew; 2) fruit rot; 3) rust, because its active ingredient is penconazole.

Its toxicity is moderate. It belongs to the third class in terms of danger to living organisms. This agent provides a protective membrane for the culture, and also inhibits the multiplication of fungal spores.

The impact speed is quite high. Indeed, after a few hours, after the processing procedure, the process of mycelium growth will be stopped. Since this drug is systemically active, it allows you to successfully destroy fungal spores even in those places that are difficult to access and also vulnerable.

Resistant to weather conditions.

This product is highly resistant to weather conditions. This is due to the fact that it penetrates very quickly into the cells of the culture. That is why it is excellent for fruit and berry and horticultural crops. The first seventy-two hours after the treatment procedure, this drug exhibits disinfecting and antifungal effects. After seventy-two hours, the components of the preparation begin to work on the protective layer for the plants.

About phytotoxicity.

This drug has no phytoxicity, that is, it will not reduce the growth and development of plants, nor will it affect the vegetation process. It is worth noting that this drug has been developed quite recently, which suggests that it can destroy even fungal spores of a new species. This is very important because fungal spores of a disease such as powdery mildew very often mutate and adapt to many fungicidal agents.

The shelf life of this drug.

This product can be stored for four years.

Compatibility with other drugs and the possibility of using for preventive measures.

The effectiveness of this product can be increased by mixing it with other fungicidal pesticides. This drug can be used both for medicinal purposes and for preventive procedures.

The use of topaz for various crops.

Gooseberry topaz.

In the case of gooseberries, the drug can help with diseases such as powdery mildew.It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for black currant.

In the case of black currant, the drug can help with diseases such as: American powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for grapes.

In the case of grapes, the drug can help with diseases such as: powdery mildew. You will need to allocate about one and a half liters for every ten square meters of soil. The first treatment must be carried out after the buds bloom. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Peach topaz.

In the case of peach, the drug can help with diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for raspberries.

In the case of raspberries, the drug can help with diseases such as powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for apricot.

In the case of apricot, the drug can help against diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for red currants.

In the case of red currants, the drug can help with diseases such as: American powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for strawberries.

In the case of strawberries, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment must be carried out during the formation of buds. The second treatment must be carried out after harvesting ripe fruits. In total, two treatments can be carried out.

Topaz for lilies.

In the case of lilies, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for daffodils.

In the case of daffodils, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for peonies.

In the case of peonies, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for irgi.

In the case of irga, the drug can help against diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for open field cucumbers.

In the case of cucumbers that grow outdoors, the drug can help with diseases such as powdery mildew. For every ten square meters, you will need to allocate about a liter of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz for greenhouse cucumbers.

In the case of cucumbers that grow in greenhouses, the drug can help against diseases such as powdery mildew. For every ten square meters, you will need to allocate about two liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for strawberries.

In the case of strawberries, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment must be carried out during the formation of buds. The second treatment must be carried out after harvesting ripe fruits. In total, two treatments can be carried out.

Topaz for a rose.

In the case of a rose, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for carnation.

In the case of cloves, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for potted plants.

In the case of potted crops, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution.The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Topaz for flowering plants.

In the case of flowering plants, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

If the grapes are affected by powdery mildew.

In case of damage to grapes, such a disease as oidium, you can process the bush with topaz. To do this, you need to dilute four milliliters of the product in ten to twelve liters of pure water. Since topaz is available in ampoules, you will need to take two ampoules. Treatment must be carried out by spraying. One bush will require about one to one and a half liters of solution.

Security measures.

We must not forget about our safety when working with chemicals. Topaz is quite toxic to humans. When working with him, you need to use protective clothing. You need to use: 1) goggles; 2) a restaurateur; 3) a protective apron; 4) latex gloves. It is necessary to spray in the direction of the windy stream. If the solution gets on the skin, wash it off immediately. After processing, you need to take a shower and wash your hands thoroughly.

How much to process.

You can process grapes every fifteen to twenty days. But it is very important to stop using the product ten to fifteen days before you start harvesting. The dosage also cannot be exceeded, otherwise it will have a detrimental effect on the condition of the grape bush.

Use of the drug for prophylaxis.

If you use this remedy for prophylactic purposes, then you will need to carry out about four treatments during the entire growing season of the plant. To prepare a solution, you need to: dilute two milliliters of the product in ten to twelve liters of pure water. Next, spray at the rate: one to one and a half liters for each bush.

If you have not used the entire solution.

If the solution is not used immediately, then it will simply have to be poured out. It cannot be stored. And if you carry out the treatment, with the solution that has already stood for a certain amount of time, then this will not bring an effect. Its active ingredients can only work immediately after preparation of the solution. Therefore, it is very important to observe the dosage according to the enclosed instructions and the area to be treated.

Conclusion.

Based on the fact that this drug acts rather quickly, then after ten to fifteen days, the diseased plant returns to normal, and the fungal spores die. If you are using this drug, no other fungicide is needed. It is also worth noting that he fights against any type of disease. Also, its advantages include its low financial costs for its acquisition.