Fungicides for grapes

All grape lovers know that if a grape is sick with something, then it will suffer greatly from this and the future harvest may be significantly reduced. And the crop that remains will be of inadequate quality. For example, with a disease such as chalk on unstable varieties, the yield can be reduced by almost fifty percent, and if the plants are severely affected, then there may be no harvest at all. That is why grape lovers often resort to chemical protection of their plants, for this they use fungicidal preparations.

Briefly about the importance of fungicidal preparations for growing grapes. About possible drugs

It is very important to consider the percentage of productivity of the selected drugs. At the moment, in specialized stores, there are a large number of them. In total, there are three types: 1) fungicidal systemic drugs; 2) fungicidal contact preparations; 3) fungicidal complex preparations.

More about contact fungicides

When using this tool, in order to obtain the desired effect in prevention or treatment, you need to pay special attention to the deciduous part, as well as the trunk of the plant. It should also be borne in mind that if the next day, after the treatment, it starts to rain, then it will wash away the entire preparation, that is, it is necessary to re-treat it.

Disadvantages of contact fungicidal preparations

The main disadvantage is that you will have to spray several times. In order for the plants to have proper protection, it is necessary to carry out about seven to eight treatments. It is also very important to observe the breaks between these treatments. If you did not use this drug on time, then you will have to turn to funds with a systemic or complex action.

Systemic fungicidal drugs

These drugs are distinguished by their ability to penetrate into the inner part of the plant tissue, thereby affecting the entire system of the culture organism. It helps to suppress growth, development, and reproduction of harmful micronutrients. The funds of this group can be used both for preventive purposes and for the treatment of already infected plants. From this we can conclude that the plant will not need to be processed several times.

The advantages of systemic fungicidal drugs

The drugs in this group have several important advantages.

• These drugs penetrate quickly enough and also affect the plant.
• If, after processing, it rains, then it will not be able to wash off the drug from the foliage. That is, the plants will not need to be re-processed.
• These funds have healing effects. They can help in the early stages of viral as well as fungal infections.
• For proper protection, the plant needs to be treated only three times during the summer. This will be enough.

The most productive and popular fungicidal preparations

Systemic fungicidal drugs

These funds include: 1) quadris; 2) foil; 3) speed; 4) strobes; 5) topaz; 6) falcon.

Contact fungicidal preparations

These funds include: 1) shavit; 2) foundation; 3) thiovit jet; 4) cuprozan.

Fungicidal preparations of complex action

Among these funds are distinguished: 1) polychrome; 2) paracelsus; 3) convertible top; 4) acrobat.

Systemic fungicidal drug - quadris

This is a new generation tool. It belongs to the group of strobilurins. It boasts of its wide range of effects. It can be used for processing: 1) vegetable crops; 2) fruit crops; 3) berry crops. It is also great for grape bushes. It is used for both prophylactic and medicinal purposes.It is known for the fact that it can provide high-quality protection to bushes from various infections of the fungal type. It is also worth noting that it is absolutely safe for: 1) ecology; 2) a person; 3) animals; 4) plants; 5) soil. You can buy it in the online store, or in specialized tents.

How to properly use a systemic fungicide called quadris

There are several rules.

1. It is necessary to carry out the procedure for spraying the culture either in the morning or in the evening.
2. It is very important to find the right air temperature. It should not be below five degrees Celsius, as well as above thirty degrees Celsius.
3. To prevent this drug from moving to a crop adjacent to grapes, the weather must be calm.

Systemic fungicidal drug - fast

This drug can be called an adversary to various fungal diseases. They can not only treat, but also carry out preventive measures. It is excellent for preventive purposes, against diseases such as powdery mildew and oidium. It can be used not only for grape bushes, but also for other fruit and berry crops.

About the use and effects of a systemic fungicidal drug called scor

To make a solution from this product, you need: five milliliters of this drug, diluted in ten liters of pure water. This substance can have a protective effect for ten to fifteen days. If your culture is affected by a fungal infection, then the plant will need to be processed about four times. This substance is safe for humans, as well as for the entire garden. If you could not purchase this tool, then you can replace it with any means like Mikal and Bayleton.

Systemic fungicidal drug - topaz

This tool can provide protection for your crop from diseases such as: 1) mildew; 2) oidium; 3) Rust. The highest productivity of this drug will be noticeable in the early stages of the development of fungal-type diseases.

How to make and use a systemic drug called topaz

To make a solution, you need: two milliliters of the drug, diluted in ten to twelve liters of pure water. And if the plants, for example, are infected with such a disease as its oidium, then spraying should be carried out at least twice, with an interval of ten to fifteen days. If there is a need to carry out one more treatment, then after topaz., You can use various preparations of contact exposure.

Benefits of a systemic fungicide called topaz

This drug has a number of known advantages.

• In the early stages of development, it very quickly suppresses pathogenic microorganisms.
• Plant cultures take it well.
• The duration of its impact is quite long.
• It can be used in combination with other drugs.
• It is quite economical in its consumption.

Fungicidal agent topaz for gooseberries.

In the case of gooseberries, the drug can help with diseases such as powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for black currant.

In the case of black currant, the drug can help with diseases such as powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest.There are four treatments in total.

Fungicidal agent topaz for grapes.

In the case of grapes, the drug can help with diseases such as: powdery mildew. You will need to allocate about one and a half liters for every ten square meters of soil. The first treatment must be carried out after the buds bloom. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for peach.

In the case of peach, the drug can help with diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for raspberries.

In the case of raspberries, the drug can help with diseases such as powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for apricot.

In the case of apricot, the drug can help against diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for red currants.

In the case of red currants, the drug can help with diseases such as: American powdery mildew. It will be necessary to allocate about one and a half liters for each bush. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for strawberries.

In the case of strawberries, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment must be carried out during the formation of buds. The second treatment must be carried out after harvesting ripe fruits. In total, two treatments can be carried out.

Fungicidal agent topaz for lilies.

In the case of lilies, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment should be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for daffodils.

In the case of daffodils, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for peonies.

In the case of peonies, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for irgi.

In the case of irga, the drug can help against diseases such as: 1) powdery mildew; 2) fruit rot. You will need to allocate about five liters of solution for each seedling. The first treatment must be carried out before the flowering period. The second treatment should be carried out immediately after the plant has faded. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Topaz fungicide for open field cucumbers.

In the case of cucumbers that grow outdoors, the drug can help with diseases such as powdery mildew. For every ten square meters, you will need to allocate about a liter of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out twenty days before harvest. There are four treatments in total.

Fungicidal agent topaz for cucumbers growing in greenhouses.

In the case of cucumbers that grow in greenhouses, fungicidal preparations can help against diseases such as powdery mildew. For every ten square meters, you will need to allocate about two liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for strawberries.

In the case of strawberries, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment must be carried out during the formation of buds. The second treatment must be carried out after harvesting ripe fruits. In total, two treatments can be carried out.

Fungicidal agent topaz for rose.

In the case of a rose, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first sign of getting sick. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for cloves.

In the case of cloves, the drug can help with diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal agent topaz for potted plants.

In the case of potted crops, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest.In total, three treatments can be carried out.

Topaz fungicide for flowering plants.

In the case of flowering plants, the drug can help against diseases such as: 1) powdery mildew; 2) rust. For every ten square meters, you will need to allocate about one and a half liters of solution. The first treatment should be carried out at the first signs of the disease. The second treatment must be carried out ten to fifteen days later, after the first. The last treatment must be carried out three days before harvest. In total, three treatments can be carried out.

Fungicidal drug of systemic action - Falcon

This drug has three active ingredients that actively fight against fungal infections. It can be used for both prophylactic and therapeutic purposes. It is suitable not only for a private garden, but also for an agricultural scale.

For what purposes can you use a systemic fungicidal drug called falcon

It has two uses.

The first option is for preventive measures

For prophylaxis in the fight against fungal diseases, you need to prepare a solution. To do this, you need: five milliliters of the product, stir in ten liters of clean water.

The second option is for medicinal purposes

To do this, you need to prepare a solution with a high concentration of the substance. That is, you need to mix ten milliliters of the product with ten to twelve liters of clean water.

What diseases can a fungicidal drug of systemic action called falcon fight against?

Since this drug has such advantages as: 1) quick effect; 2) duration of exposure. He can fight such diseases as: 1) oidium; 2) powdery mildew; 3) with various types of spotting.

When can a systemic fungicide called falcon be used?

Experienced gardeners recommend using it during all growing seasons. That is, it is possible to carry out the treatment with this drug at the time of flowering of the culture.

Fungicidal drug for systemic effects - strobe.

This agent is antifungal. It has healing and eradicating effects. Its main purpose is to destroy all pathogenic microorganisms that are involved in the progressiveness of diseases such as mildew and powdery mildew. This tool can be used instead of several tools at once. It will have a detrimental effect on pathogenic microorganisms. It is also important to note that you can use this drug throughout the entire life of the plant. It can also be used both as a prophylactic agent and as a remedy.

How many times must be treated and what should be the concentration of a fungicidal agent of systemic action called strobe

In one season, you need to carry out just a couple of treatments, this will give the maximum protection of the plant. The concentration of the drug should be as follows: two kilograms of the product, you need to dilute in seven liters of pure water.

When can I use a systemic fungicide strobi?

This drug penetrates perfectly, and also acts on pathogenic microorganisms. It can be used in any weather, it will not be washed away by rain. It is also worth noting that it is quite safe for: 1) ecology; 2) people; 3) animals; 4) soil; 5) the plant itself.

Fungicidal preparation of contact action - thiovit jet

This drug occupies a special and honorable place in the killer drugs of contact exposure. With it, you can fight fungal-type infections, as well as various mites. After treatment, the plants will be protected for about ten to fifteen days. Due to the fact that the biological activity of this drug is quite high, the yield loss will be minimized as much as possible. This drug can be replaced with: 1) colloidal sulfur; 2) a drug called thanos.

What diseases can a contact fungicide called thiovit jet fight against?

Based on the fact that this drug belongs to agents with biological effects, it can be highly effective in combating diseases such as: 1) mildew; 2) oidium; 3) American powdery mildew.

Fungicidal preparation of contact action - foundazol

This drug is already quite old, proven, and also loved by many gardeners. It fights well against various diseases of the fungal type. For example, he can easily overcome diseases such as: 1) powdery mildew; 2) rot; 3) various types of spotting. Its effect differs in that it perfectly penetrates into the tissue of the culture, thereby protecting the plant from the inside. The systemic effect of the agent will manifest itself during the watering procedure. In this way, the root system will be treated against various diseases.

Contact action fungicide - shavit

This tool has proven itself well for medicinal and prophylactic purposes. With it you can fight: 1) mildew; 2) oidium; 3) black spot. Its active ingredients are: 1) triadimenol; 2) folpet. These components perfectly provide long-term protection of the crop from various diseases. It is also worth noting the safety of this drug. It is not toxic to: 1) people; 2) animals; 3) ecology; 4) soil; 5) the plant itself. It can be used not only for therapeutic and prophylactic purposes, but also for the eradication of pathogenic microorganisms in culture.

How many times must be treated and what should be the concentration of the fungicidal contact agent called shavit

Apply this fungicidal preparations, you need to in the form of a solution. To make a solution, you will need: two tenths of a gram of the drug, they must be diluted in ten to twelve liters of clean water. Use immediately after preparation. If you leave it to stand, then it can lose useful properties and productivity. In order for your plants to have proper protection, you only need to carry out a couple of treatments. Also, if you find the first signs of the appearance of fungal diseases, you need to carry out three treatments with the drug with a break of ten to fifteen days.

Fungicidal agent of contact action - kuprozan

Cuprozan is copper oxychloride. This product is moderately toxic. It can be used to fight various fungal infections. It can be used throughout the growing season. In one season, you can carry out tillage from three times to six times. This drug can fight diseases such as: 1) mildew; 2) oidimum; 3) rot. This drug boasts that you can buy it anywhere. Also, its advantages include its high productivity. Fungicidal preparations can be used for both prophylactic and therapeutic purposes. You can replace it with drugs: 1) euparen; 2) fital; 3) anthracol.

Complex fungicidal preparations

Despite the fact that these drugs are new for our market, many garden lovers have already fallen in love with them.

Fungicidal preparation of complex action - cardio top

This is a combined drug, that is, it can fight two diseases at once: powdery mildew and mildew. It is also worth noting that this drug not only fights against fungal diseases, but also destroys insect pests. The substances of this agent act as a protective barrier for sheet plates. It will not wash off due to rain.

What diseases can a fungicidal preparation of complex action called cabrio top fight against?

This tool is highly effective against various fungal diseases.What diseases can be distinguished: 1) oidium; 2) mildea. It can also be used in the treatment of: 1) anthracnose; 2) various types of spotting. It should also be noted that treatments with this drug do not need to be carried out too much. That is, a toxic effect on: 1) the environment; 2) people; 3) animals; 4) plants; 5) the soil is significantly reduced.

Fungicidal preparation of complex action - Paracelsus

It is a contact and systemic fungicide. It can heal and eradicate almost all grape diseases. In addition, it is worth noting that it can regenerate damaged plant tissues. This drug can be replaced by means called: 1) scalpel; 2) impala; 3) a medicine man; 4) cornet.

How does a compact fungicide called Paracelsus work?

This substance has an active ingredient called flutriafol. It is he who will disrupt the process of growth, development, and reproduction of fungal infections. The synthesis of the cell walls of fungal spores will also be disrupted. This toxic substance will enter the fungal cell, and this is what will stop the formation of pathogenic microorganisms.

Benefits of a contact fungicide called paracelsus

This drug has several benefits.

• It creates a protective barrier to culture from repeated damage for forty to forty-five days.
• This substance is not toxic to the environment.
• Based on the fact that this substance penetrates quite deeply into plant tissues, it creates a high degree of protection for the entire culture.
• This tool is completely safe for: 1) ecology; 2) people; 3) animals; 4) plants; 5) soil.
• This drug takes effect very quickly.
• This drug will not wash off with rain.
• This drug is famous for its triple action: 1) contact action; 2) systemic exposure; 3) fumigation.

Fungicidal preparation of complex action - polychom

This drug is from a complex group of funds. It can protect grapes from various pathogens. Its active ingredients are: copper oxychloride and polycarbacin. Together, these substances work even more intensely and effectively. It is possible to carry out processing with this tool in any weather conditions. It is also worth noting that there will be no large financial costs. But it is very important to remember that this remedy is recommended to be used only during the growing season of the culture. On average, about four to six treatments will be required per season. This tool can be replaced by means such as: 1) revus; 2) polishers; 3) tilt.

Fungicidal preparation of complex action - acrobat.

This tool is used for the spraying procedure. It is distinguished by its: 1) contact actions; 2) systemic actions; 3) antifungal actions. Its active substances are distinguished: dimethomorph and mancozeb. These elements perfectly provide a protective barrier against various pathogens. Culture will be protected, both inside and outside.

How to properly use a complex action fungicide called acrobat

Use this drug as a solution. To dilute the product, you need to strictly adhere to the attached instructions. In order to maximally protect plants from various fungal infections, at least four treatments must be carried out. You can replace this remedy with the help of drugs such as: 1) Homecin; 2) chorus.

Conclusion

The choice among fungicidal preparations is very large. You only need to decide on the type of their action and active substances. Pay due attention and care to your crops, and they will reward you with a high-quality and tasty harvest.